![](/images/new-backgrounds/1253060/2530603x1.webp)
Introduction
The Sima LED Universal Video Light Model
Batteries:
The
2.5to 3 hrs. Note: use only the supplied AC adapter/charger to charge the battery.
Because of its long lifetime the Lithium ion battery in this unit does not need to be replaced.
To charge the batteries:
1.Insert the jack on the power cord into the power input jack on the rear of the
2.Plug AC transformer into a standard
120 VAC wall outlet. The red LED indicator light, beside the power jack, will turn on.
3.The battery must charge 2.5 to 3 hours before it is fully charged. Note: indicator light will turn green when charging is complete.
4.A fully charged
battery will provide 45 to 60 minutes of
run time.
Note: Light does not work with AC adapter plugged in unit’s power jack.
1
Special Notes:
•Be sure to set you camera or camcorder to “night vision” mode so it can “see” the IR light source.
•When using multiple lights, each light must be charged individually.
•The lens has been frosted to diffuse light evenly and eliminate hot spots.
•Light does not work with AC adapter plugged in unit’s power jack.
•Universal shoe mount located on the side of the unit can be used to attach accessories with a universal shoe.
Operation:
Turn light on or off by sliding the ON/OFF switch to the desired position as shown below
Specifications:
LEDs: 36 high intensity, IR 850nm
Power: Lithium ion
Run Time: 45 to 60 Minutes depending on battery usage.
Charge Time: 3hrs for a full charge
Battery Type: 3.7V 730mA
Charger: 120V AC input; 5V DC output
Weight: 2.5oz (with battery).
Size: 2.35” x 2.3” x 1”
Effective Range: 10’ to 75’
© 2007 Sima Products Corporation
P/N 21772 | Made in China |