Simaudio owner manual Remote Control Operation, MOON CD-1CD Player

MOON CD-1 CD Player

Remote Control Operation

The MOON CD-1CD Player uses the ‘CRM’ full-function remote control (figure 3). It operates on the Philips RC-5 communication protocol and is can be used with other Simaudio MOON components.

The ‘CRM’ remote uses two AA batteries (included). To install them, simply slide the back plate off in the direction of the arrow; insert the batteries in the correct direction and then replace the back plate.

To engage the CRM remote for use with the MOON CD-1CD Player, you must first press the button labeled CD.

The POWER button located on the upper left will switch the CD Player to either ‘Stand by’ or ‘On’ mode.

Certain buttons found on this remote control perform identical functions to their corresponding button located on the CD-1’sfront panel. Please refer to page 7 for a more detailed description:

0 thru 9	Direct access track number selection
OPEN/CLOSE	Open/Close the Compact Disc drawer
DISPLAY	Press Once: Changes the time display mode on front panel
	Press and hold: Turns the front panel display on and off
	(refer to page 11 for more details about the DISPLAY function)
„	Stop playing the CD’s current track
	Pauses the player

XPlay the compact disc loaded into the player

Press Once: Go back to the previous track on the disc

Press and hold: Scan backward through current track

Press Once: Skip to the next track on the disc

Press and hold: Scan forward through current track

Figure 3: CRM Remote Control

___________________________________________________________________________

Remote Control Operation 10