MOON W5.3 Stereo Power Amplifier
Specifications
Configuration | Stereo |
| ||
Power Supply Transformer | ...................................... | 1.0kVA |
| |
Power Supply Capacitance | ...................................... | 115,000µF | ||
Class Of Operation | A/AB |
| ||
Design | Balanced Differential to output stage | |||
Input Impedance | 47,500Ω | |||
Input Sensitivity | 1000mV | |||
Output Device Type | Bipolars - 8 per channel | |||
Output Power at 8Ω | 150 Watts per channel | |||
Output Power at 4Ω | 300 Watts per channel | |||
Output Power – Bridged Mono at 8Ω | 600 Watts | |||
Frequency Response | 10Hz - 125kHz | |||
Output Impedance | 0.01Ω |
| ||
Damping Factor (static) | 800 |
| ||
Gain | ...................................................................... | 31dB |
| |
> 100dB @ full power | ||||
Maximum Output Voltage | ....................................... | 40 Volts | ||
Slew Rate | 42V/µs |
| ||
Maximum Current – Peak | 38 amperes | |||
Maximum Current – Continuous | 20 amperes | |||
Crosstalk @ 1kHz |
| |||
Intermodulation Distortion | ...................................... | Unmeasureable | ||
THD | (20Hz - 20kHz @ 1 watt) | < 0.02 % | ||
THD | (20Hz - 20kHz @ 150 watts) | < 0.05 % | ||
Power Consumption @ idle | ..................................... | 45 Watts | ||
AC Power Requirements | 120V / 60Hz or 240V / 50Hz | |||
Shipping Weight | 50 lbs | / 22 Kgs | ||
Dimensions (W x H x D, inches) | 17 x 7.5 x 17 | |||
Balanced Pin Assignment: Pin 1 | Ground |
| ||
|
| Pin 2 | Positive | |
|
| Pin 3 | Negative | |
12 Volt Trigger: | Logic | Direct | (0V off, 12V on) | |
|
| Jack | 3.5mm microphone jack | |
|
| Input Impedance | 1kΩ |
|
|
| Current Consumption | 12mA |
|
Fuse Replacement: | For the 120V version use a 6A fast blow | (3AG size). |
| For the 230V version use a 3A fast blow | (3AG size). |
____________________________________________________________________________________
Specifications | 12 |
