Simplicity 1693775 860M Engine, Traction Drive, Auger Housing, Auger & Impeller Drive, 8 HP

ENGINE

Make	Tecumseh
Cylinders	1
Cycles	4
Crankshaft	Horizontal
8 HP
- Model No	See engine I.D. plate
- Bore & Stroke	3-1/8 in. x 2-17/32 in.
	(79.90 mm x 64.31 mm)
- Displacement	19.43 cu. in.
	(318.30 cc)
Ignition	Magneto
Governor	Mechanical
Choke	Manual
Lubrication	Splash system
Oil Capacity	See engine manual
Fuel Capacity	See engine manual

TRACTION DRIVE

Type	Friction drive transmission w/chain
	gear drive and speed selection
Speeds	Five forward and two reverse
Axle	Solid w/klik-pin lock for two-wheel drive
Tire Inflation	20 psi (137 kPa)

AUGER HOUSING

Construction		Welded steel stampings
Effective Width
- Model 8-60M		24 in. (60 cm)
Auger Opening Height		...........................19 in. (47.5 cm)
Spout Rotation		210 degrees
Scraper Bar	High Carbon, wear resistant steel
Skid Shoes		Adjustable, heat-treated steel

03

		Specifications
AUGER
Construction	Ribbon flite welded steel
Bearings		Self-lubricating
IMPELLER
Construction		4 steel blades
Bearings	Pre-lubricated and sealed ball bearing
Diameter		12 in. (30 cm)
AUGER & IMPELLER DRIVE
Type	Cushion V-belt and worm gear housing
OVERALL DIMENSIONS & WEIGHT
Model 8-60M
- Length		54 in. (137 cm)
- Width		26 in. (65 cm)
- Height		43 in. (109 cm)
- Weight		236 lbs. (107 kg)

SPECIFICATIONS ARE CORRECT AT TIME OF PRINTING AND ARE SUBJECT TO CHANGE WITHOUT NOTICE.

21