General Operating Instructions

Before Operation

Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades.

Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.

For efficient bagging, air circulation under the mower deck, through the chute and into the bag is very important.

For this reason, BEFORE YOU BEGIN MOWING you should make certain the underside of the mower and the underside of the catcher lid are free from grass and debris.

Make sure that there is a snug fit between mower deck, blower housing, tubes, and grass catcher cover.

Mowing with the Catcher

Always operate with throttle at full speed when mowing.

Grass should be cut often, and not too short. If grass is too long or lush it may be necessary to keep ground speed to a minimum or to cut only half the width of the mower to prevent clogging. If grass is long, operate with mower in high cutting position for first pass, cutting again in a lower position on a second pass.

Do not open the cover with mower engaged.

If a large amount of cut grass is spilling out from under deck, the tube may be plugged or the bags may be full— discontinue mowing, stop the unit, disengage the PTO, shut off the engine and then empty the catcher or clear the tube.

WARNING

ALWAYS shut off the tractor. Disengage the PTO, and allow all moving parts to stop BEFORE disconnecting or clearing tube, or emptying catcher.

Before leaving the operator’s position for any reason, engage the parking brake, disengage the PTO, stop the engine and remove the key.

To reduce fire hazard, keep the engine, rider and mower free of grass, leaves and excess grease. Do not stop or park rider over dry leaves, grass or combustible materials.

CAUTION

Before you begin operating the unit be certain you have read all of the safety and operational information of this instruction sheet, as well as the Operator’s Manual for the tractor and any other attachments.

Never operate on slopes greater than 17.6% (10°).

After Operation

Remove any debris from the the screen on the underside of the lid.

The blower housing and tube should be removed for cleaning.

Inspect the grass bags for wear or damage. Make sure that there is a snug fit between mower deck, blower housing, tubes, and grass catcher cover.

CAUTION

Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

Storing The Grass Catcher

Clean the grass catcher thoroughly using a mild deter- gent (other products may damage the tube). Remove any debris from the the screen on the underside of the lid.

If paint has been scratched on metal parts, touch up with paint, or apply a thin film of oil to prevent corrosion.

Store in a dry area. Dry thoroughly before storing for a long period of time. Always store away from moisture.

3

Page 5
Image 5
Simplicity 1694918 manual Before Operation, Mowing with the Catcher, After Operation, Storing The Grass Catcher

1694918 specifications

Simplicity 1694918 is an innovative solution that embodies the principles of simplicity and efficiency in design. Positioned within the realm of advanced technology products, it seamlessly integrates practicality with modern features. This product is tailored for users who prioritize ease of use while still seeking functionality.

A primary characteristic of Simplicity 1694918 is its user-friendly interface. The intuitive design ensures that even those who are not tech-savvy can navigate its various features effortlessly. This approach not only enhances usability but also fosters a more engaging user experience. The emphasis on simplicity extends to the aesthetic appeal; the sleek design is functional yet visually pleasing, making it a fantastic addition to any environment.

From a technological standpoint, Simplicity 1694918 is equipped with cutting-edge components that provide robust performance. It employs advanced processing capabilities that ensure rapid data handling and seamless multitasking. The integrated software is optimized for efficiency, allowing users to execute tasks more quickly and with fewer interruptions. Whether used for personal projects or professional purposes, the performance of Simplicity 1694918 exceeds expectations.

Another notable aspect of Simplicity 1694918 is its adaptability. The product supports various applications and workflows, making it suitable for a range of industries, from creative pursuits to technical environments. The flexibility it offers means that users can customize their experience based on individual needs and preferences.

Moreover, Simplicity 1694918 features connectivity options that enhance its functionality. It includes compatibility with various devices and platforms, ensuring that users can easily synchronize their data and access important information whenever needed. This interoperability is a testament to the product's design philosophy, which values integration and cooperation.

In terms of durability, Simplicity 1694918 is built to withstand the rigors of daily use. With high-quality materials and craftsmanship, it promises longevity, making it a worthwhile investment for users looking for reliability.

In summary, Simplicity 1694918 stands out as a well-rounded product that merges simplicity with advanced technological features. Its user-friendly interface, powerful performance, adaptability, connectivity, and durability position it as a leader in its category, catering to those who seek both functionality and elegance in their tech solutions.