Manuals / Simplicity / Lawn and Garden / Lawn Mower

Simplicity 16HP V-Twin manual Troubleshooting, Adjustment, & Service, Leveling The Mower

Models: 16HP V-Twin

1 50
Download 50 pages 61.88 Kb
Page 33
Image 33

Troubleshooting, Adjustment, & Service

,A WARNING -1

Before checking mower, shut off PTO and engine. Allow all moving parts to stop. Remove ignition key, then disconnect the spark plug wire and fasten it away from the spark plug.

Leveling The Mower

If the cut is uneven, the mower may need leveling. Unequal or improper tire pressure may also cause an uneven cut. Make sure tire pressure is correct as speci- fied in Checking Tire Pressure.

1.With the mower installed, place the tractor on a smooth, level surface such as a concrete floor. Turn the front wheels straight forward.

2.Check for bent blades and replace if necessary.

3.Disengage the PTO. Place the mower in mid-cut position. Arrange the mower blades so that they are pointing from side-to-side.

4.Measure the distance between the outside tips of each blade and the ground. If there is more than i/8” (3mm) difference between the measurements on each side, proceed to step 5. If the difference is l/8” (3mm) or less, proceed to step 6.

5.See Figure 39. Loosen the outside nut (A). Turn the eccentric nut (B) to raise or lower left-hand side of mower. When mower is level, hold the eccentric nut while tightening the outside nut.

NOTE: When using a turbo collection system, raise the discharge side of the mower approximately l/4” to com- pensate for turbo assembly weight. Check the level of the cut grass and a&St the l/4” measurement as neces- sary for a smooth, even cut.

6.Arrange the blades so they face front-to-back.

7.On 38” deck, measure the distance from the ground to front tip and rear tip of the left and right-hand blades.

On 44” and 50” decks, measure the distance from the ground to the front tip of the center blade, and from the ground to rear tips of left-hand and right-hand blades.

Front tips on all decks should be 1./4” higher. If not,

proceed with steps 8 - IO.

‘.

8.See Figure 40. To raise front of moweideck, loosen front nut (A) and turn rear nut(B) against bracket (C).

9.To lower front of mower deck, loosen rear nut (B) and bracket (C) will move backwards to lengthen rod.

Figure 39. Leveling The Mower Side-to-Side

A. Outside Nut

B. Eccentric Nut

Figure 40. Leveling The Mower Front-To-Back

A. Front Nut

C. Mower Bracket

B. Rear Nut

D. Adjustment Rod

IO. Re-check measurement before tightening front nut

(A) against bracket.

27

Page 32 Page 34
Page 33
Image 33
Simplicity 16HP V-Twin manual Troubleshooting, Adjustment, & Service, Leveling The Mower
Page 32 Page 34

16HP V-Twin specifications

The Simplicity 16HP V-Twin is a notable feature in the world of lawn and garden equipment, offering a powerful and reliable solution for homeowners seeking to maintain their lawns with ease. This engine is specifically designed to provide robust performance while ensuring user-friendly operation, making it an ideal choice for residential mowing and landscaping tasks.

One of the main features of the Simplicity 16HP V-Twin is its 16 horsepower rating, which is sourced from a well-engineered V-twin configuration. This design enables smooth operation with enhanced torque, providing the necessary power for mowing through thicker grass and uneven terrain. The V-twin design also results in reduced vibration, leading to greater comfort during extended mowing sessions.

Additionally, the engine boasts an overhead valve (OHV) design, promoting efficient combustion and improving fuel economy. The OHV technology ensures better airflow into the combustion chamber, leading to improved power output while simultaneously reducing emissions. This means users can achieve a cleaner cut with less environmental impact.

Simplicity has also integrated a dual-element air filtration system into this engine, which helps to extend its lifespan and reliability. The efficient air filtration system prevents dirt and debris from entering the engine, reducing wear and providing peace of mind during operation.

A key characteristic of the Simplicity 16HP V-Twin is its ease of maintenance. The engine features an accessible oil fill and dipstick, simplifying the process of oil changes and ensuring that operators can keep the engine well-maintained without excessive hassle. The design also incorporates a spin-on oil filter, allowing for quick and clean oil changes—a feature not commonly found in engines within this category.

Moreover, the engine is compatible with various attachments, providing versatility that allows owners to customize their lawn care experience according to personal preferences and needs. From mulching to bagging, the Simplicity 16HP V-Twin offers a platform for diverse lawn care tasks.

In summary, the Simplicity 16HP V-Twin stands out as a powerful and efficient engine choice for avid gardeners and homeowners alike. Its robust power, advanced technologies, and user-friendly characteristics make it an excellent investment for those committed to maintaining a beautiful lawn with minimal effort.