4.Remove the self-locking cotter pin and washer (A, Figure 11) securing the front of each stabilizer rod (C) to the rear mower deck brackets. Also remove the outer lock nut (B) securing the rear of each stabilizer rod to the mounting bolt on the transmission casing. Remove the stabilizer rods and retain all removed components.

5.Remove the hairpin clips and washers (D, Figure 11) securing the rear mower deck brackets to the rear lift arm rod swivels, and pull the swivels out from the holes in the brackets. Retain all removed hardware.

6.Remove the hairpin clips and washers (A, Figure 12) securing the front mower deck brackets to the front lift arm rod swivels, and pull the swivels out from the holes in the brackets. Retain all removed hardware.

7.Pivot the front wheels out of the way and slide the mower deck out from under the unit.

Installation

1.Disengage the PTO, lock the motion control levers into their neutral lock positions, turn off the ignition, remove the key, and wait for all moving parts to stop.

2.Lower the height adjustment lever to its lowest posi- tion. See “CUTTING HEIGHT ADJUSTMENT”.

3.Pivot the front wheels out of the way and slide the mower deck under the unit. Place a 2 x 4 or similar support under each end of the mower deck.

4.Insert the front lift arm rod swivels into the holes in the front mower deck brackets, and secure each with a washer and hairpin clip (A, Figure 12).

5.Insert the rear lift arm rod swivels into the top holes in the rear mower deck brackets, and secure each with a washer and hairpin clip (D, Figure 11).

6.Install the rear end of each stabilizer bar (C, Figure 11) onto the mounting bolt on the transmission cas- ing, securing with a lock nut (B).

Note: Tighten the lock nuts only enough so that the stabilizer rods are snug but not tight.

Install the front end of each stabilizer rod out through the bottom holes of the rear mower deck brackets, and secure each with a washer and self-locking cotter pin (A).

7.Pull back on the tensioning idler (D, Figure 10) in the direction indicated, and install the belt onto the PTO pulley as shown in Figure 10.

Important: Be sure the belt is installed properly onto all pulleys.

 

Operation

D

 

C

B

 

A

 

Figure 11. Rear Deck Lift Components

A.Pin & Washer (Left side shown, right side same)

B.Lock Nut (Left side shown, right side same)

C.Stabilizer Rod (Left side shown, right side same)

D.Hairpin Clip & Washer (Left & right)

A

Figure 12. Front Deck Lift Components

A. Hairpin Clip & Washer (Left & right)

15

Page 16
Image 16
Simplicity 250 Z manual Installation

250 Z specifications

The Simplicity 250 Z is an impressive zero-turn mower designed for optimal performance and user comfort in residential and commercial landscaping. With a robust build and a host of advanced features, it stands out in the competitive mower market.

At the heart of the Simplicity 250 Z is a powerful engine that ensures consistent and reliable cutting performance. Its integrated 25-horsepower engine provides ample power to tackle various terrains and grass types efficiently. The mower is equipped with a heavy-duty steel frame that enhances durability, making it suitable for prolonged use without compromising on performance.

One of the standout features of the Simplicity 250 Z is its unmatched cutting precision. The mower boasts a 52-inch or a 61-inch cutting deck with a unique design that promotes superior airflow, allowing for an even and clean cut. The adjustable cutting height ranges from 1 to 4.5 inches, giving users the flexibility to achieve their desired lawn appearance. Additionally, the mower uses a patented mower deck technology that enables superior grass dispersion, ensuring a well-manicured lawn every time.

Comfort is a top priority in the design of the Simplicity 250 Z. It features a plush, high-back seat with armrests, providing optimal support over extended mowing sessions. The ergonomic controls are easy to reach and manage, allowing operators to maneuver the mower effortlessly around obstacles. With a zero-turn radius, the turning capabilities of the Simplicity 250 Z allow for efficient and precise navigation, making it ideal for yards with tight corners or intricate landscaping.

The mower also incorporates advanced technologies, such as an easy-to-use control panel featuring an hour meter, fuel gauge, and battery indicator for seamless operation. The built-in maintenance reminder system helps users keep track of regular upkeep, ensuring the mower remains in excellent condition for years to come.

Safety features are essential for any outdoor equipment. The Simplicity 250 Z includes an innovative cutting blade brake that engages when the operator leaves the seat, minimizing accidents and enhancing user safety.

Overall, the Simplicity 250 Z combines power, precision, and comfort, making it a valuable addition for anyone looking to achieve a beautifully landscaped lawn with ease. Its advanced features and robust construction make it a top choice for both homeowners and professional landscapers alike.