Installation Instructions
Snowthrower Decal Conversion Kit
Part No. 1687396
Kit Contents:
Ref | Part No. | Qty. | Description |
1 | 1733057 | 1 | Chute Warning Decal |
2 | 1716532 | 1 | Auger Warning Decal |
3 | 1733033 | 1 | Dash Panel Decal |
4 | 725432 | 1 | Belt Stretch Decal |
5 | 728183 | 1 | Friction Disk Decal |
This kit contains the decals and modifications necessary to convert an export CE snowthrower into an ANSI compliant domestic product.
INSTALLATION
1.Remove the push nuts (B, Figure 1) securing the chute wireform (A).
2.Remove and discard the wireform (A).
3.Replace the
4.Remove and replace the electric starter with Briggs & Stratton electric starter kit 696611.
B
B
A |
Figure 1. Remove Chute Guard
A.Chute Guard
B.Push Nuts
Figure 2. Decal Replacement
M A N U F A C T U R I N G . | Form No. 1736017 |
| |
Briggs & Stratton Yard Power Products Group | Revision: 00 |
Copyright © 2007 Briggs & Stratton Corporation | TP |
Milwaukee, WI USA. All Rights Reserved |
|
