Simplicity 755M manual Handles and Controls Group

Handles and Controls Group

NOTE: Unless noted otherwise,	985917
use the standard hardware torque
specification chart.

6	7
5
		24	27
			26
	Apply adhesive to		28
	secure grips.		25
4	16	23
	14
148
	17
Insert shift rod (Ref. 13)	18	10
into inner hole of Ref. 15.
		11
3			34

30Must slide freely in dash assembly (Ref 24). Apply lubricant as required.

31

32

29

Ref. 29 required on slotted holes only.

36

35

37

38 7

3

2		12
1
	10	11

14	15	19
13		242
	10	20
		21
	11
12		Shift rod assembly
		(Ref. 20) must pivot
		freely on pivot blocks
9		(Ref. 14).

28 33

1622

44

	39
	40
36	41
	43

224

Must pivot freely

on capscrew (Ref 34). Apply lubricant as required.

49

8	46
	45
	47

Use washers to shim			62
gear (Ref. 54) as required		25
to insure proper adjustment.			17
	54
Mount bushings				47
	59		51	50
with flange on	61
inside of brackets.	60
59			22
			52
25		54	53
		25	Locate under rear hole of
	56	55	gear support (Ref. 51) only.

48

3

3

2

1

Position in slots of frame to be sure hub of gear (Ref. 56) is tight against the inside surface of the gear support (Ref. 51).

Slot in support (Ref. 56) towards rear of unit.

57

47

58

The above parts group applies to the following Mfg. Nos.:

1693980 555M, 5HP Manual Start

1693981 555M, 5HP Manual Start (Exp.)

1693982 755M, 7HP Manual Start (Exp.)

1693983 755E, 7HP Electric Start

© Copyright 2001 Simplicity Manufacturing, Inc. All Rights Reserved. 4 TP-400-2561-00-IW-S