Simplicity 1280E, 9560M, 9560E Handles and Controls Group 1060, 1170, 1280 & 1390 Models, 986724

Handles and Controls Group - 1060, 1170, 1280 & 1390 Models

NOTE: Unless noted otherwise, 986724

use the standard hardware torque specification chart.

11

			1		2			10					12
Linkage adjustment for traction and
auger drive with power boost: with
drive levers engaged, the bottom end of							8
lower rods (Ref. 40 & 66) should be flush
with bottom of springs (Ref. 39 & 68).					4	5		9				13
							7	14
						6
80	81	82		3				15 16	17
79		4								18	19
			74
		76		78
					4							20
					77						12
					4								22
												4	23	96
69		59												24
						21		12				5	4
		71			75
					74
36				73				28			26	25		41
												29		42
37													30
														43
38				72									31
												35
		70	Shift rod assembly					27
68			(Ref. 71) must pivot					34			36
			freely on pivot blocks
			(Ref. 21).								37
67		59
												32
											38
												33
		65			Mount clutch cable						39
												34
66					to cable support, see
														44
					Engine & Frame.			Torque to
65
								19 - 29 ft-lbs.
59
				See Auger Housing and				84
		64									40
				Chute Group - 38"
											43
										47
											46

63	To engine
	ground
	61
	To engine

48

56	Mount bushings (Ref. 78)	46
	with flange on inside of
	brackets, 3 places.

43

45

62 plug

To headlight

To spout

motor

58

57

59

60	Slot towards
	rear of unit.

48	49
	50
43

52 83

53 51

54The holes in the frame for Ref. 51 are slotted so the gear support (Ref. 45) can be positioned to ensure the inside surface of the gear support is tight against the hub of the front gear (Ref. 50).

55

The above parts group applies to the following Mfg. Nos.:

1694590	- 1060E	1694600 - 1280M
1694591	- 1170E	1694601 - 1390M
1694592	- 1280E
1694593	- 1390E
1694598	- 1060M
1694599	- 1170M

© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 4 TP 400-4155-01-LW-S