RegularMaintenance
CHECK / LUBRICATE FREE-HAND
LINKAGE
Check the function of the
section. It is critical for the safe operation of the unit that the controls disengage when released.
If the controls do not function properly, lubricate them. If
lubrication does not rectify the problem, see your dealer. Under no circumstances should the unit be used if the
controls are not functioning properly.
Figure 14. Lubricate Free-Hand TM Control Linkage
A. DO NOT Lubricate Deflector Control
IMPORTANT NOTE
It is very important that grease fittings on the auger shaft |
|
are lubricated regularly. If auger rusts to shaft, damage to |
|
worm gear may occur if shear pins do not break. | Figure 15. Lubricate Free Hand Control |
|
LUBRICATING THE AUGER SHAFT &
ASSEMBLY
1.Remove cotter pin (C, Figure 16) and shear pin (B).
2.Use a grease gun and squirt several shots of grease into grease fitting (A).
3.Rotate auger assembly (D) several times to distribute the grease evenly. Repeat step 2.
4.Reinstall shear pin (B) and cotter pin (C).
5.Repeat procedure for other side.
®
Figure 16. Lubricating the Auger Shaft Assembly
A. | Grease | Fittings | C. | Cotter | Pins |
B. | Shear | Pins | D. | Auger | Assembly |
18
