Simplicity SCR412BLS owner manual Safety Instructions, Installation, Features, Location

Models: SCR412BLS

1 12
Download 12 pages 29.83 Kb
Page 2
Image 2
Safety Instructions

Safety Instructions

ATTENTION

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electrical current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is prop- erly installed

and grounded.

WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

DO NOT USE AN EXTENSION CORD

Use an exclusive wall outlet. Do not connect your refrigerator to extension cords or together with any other appliance in the same wall outlet. Do not splice the cord.

IMPORTANT WARNING

An empty refrigerator is a very dangerous attraction to children. Remove either the gasket, latches, lids or doors from unused appliances, or take some other action that will guarantee it harmless.

DON’T WAIT! DO IT NOW!

Installation

Remove exterior and interior packings, wipe the outside thoroughly with a soft dry cloth and the inside with a wet, lukewarm cloth. Avoid placing the cabinet in a narrow recess or near any heat source, direct sunlight, or moisture. Let air circulate freely around the cabinet. Keep the rear of the refrigerator 5 inches away from the wall.

Location

1.Select a place with a strong, level floor.

2.Allow 5 inches of space between the back of the refrigerator and any adjacent wall.

3.Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will cause higher electricity consumption.

4.Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the evaporator, and your refrigerator will have to be defrosted very fre- quently.

To avoid vibration, the cabinet must be set level. This is accomplished by adjusting the (1) front leveling leg locat- ed under the refrigerator cabinet. To start the refrigerator, 1

turn the temperature control (1~ 6) to the position corre- sponding to the desired cooling.

The refrigerator temperature will vary depending on the quantity of the food stored and on the frequency with which the door is opened.

Features

1.THERMOSTAT DIAL: For controlling the temperature inside the refrigerator/freezer. Turns the motor on as soon as the temperature rises above the desired level.

2.FREEZING COMPARTMENT WITH FREEZER DOOR: holds ice cube tray and storage for frozen food.

3.ICE CUBE TRAY: Ice cubes are easily removed from the tray. (Not shown)

4.PLASTIC COATED SHELVES: Odor resistant, rustproof, and removable for easy cleaning. Full width for storing more.

5.MAGNETIC GASKETS: Tight fitting door seal keeps all the cooling power locked inside. No hooks or latches.

6.BOTTLE RACK: For tall, medium, and large bottles, canistor jars.

7.CANISTOR DOOR LINER: Holds 355ml cans of pop, juice, beer, etc.

8.DRIP TRAY: Catches the water that drips off the evap- orator when defrosting.

9.EGG TRAY:

Page 2
Image 2
Simplicity SCR412BLS owner manual Safety Instructions, Installation, Features, Location