Sinar 6008 AF, 6008 Integral manual Professional Power Supply

Professional Power Supply

The dedicated power supply is tailored to the needs of its users. The camera‘s electronics and motors are sup- plied with power by a rechargeable sintered high-per- formance Nicad battery. The benefits of this profes- sional solution are high shooting capacity, easy handling and safe operation even at low temperatures.

At standard room temperature, the energy of the dedi- cated battery is good for about 200 shots. When only about 20 exposures remain, a warning will light up in the camera viewfinder. Below a minimum charge, all camera functions will be disabled. Interchangeable bat- teries will see you through even extensive shoots.

Sufficient power is assured even at very low tempera- tures. Just carry the battery on your body or in your bag and connect it to the camera via an external battery adapter. Rolleiflex 6000 cameras come with a rapid charger with automatic charge limiter. It takes about one hour to recharge the battery outside the camera. The charger will then switch back from rapid to normal charging. In a hurry, you may stop charging after only 15 minutes. The battery will then provide sufficient energy for about 50 shots.

If there is no wall outlet around, the charger may be connected to a 12V car battery via an optional cable.

The Rollei PowerInterface offers even more power- supply options. It is the same size as the Nicad battery and can be inserted in the battery compartment instead of the latter. A choice of different power sources can then be connected to it, which opens up new possibili- ties for the stationary or mobile use of the camera. These are, for example, the standard charger, the 12V Rollei power-supply adapter, the Rollei battery box for lithium batteries, the Einhell Mobile Energy Station or the car‘s cigarette-lighter socket.

The PowerInterface requires 12 – 18 VDC of at least 200 mA.

Battery box

Rollei battery box with cable for 5x type DL 123 A 3V- lithium batteries as power source of Rollei PowerInter- face. Should always be in your bag – just in case.

Capacity about 30 – 40 films (6x6/120) in normal ambient temperature (~ + 20 to + 21°C).

Cat. No. 711.34.020

External battery adapter

Separates the power-supply holder from the camera and ensures reliable power supply even at very low tem- peratures because it can be carried close to your body. Consists of connecting cable with terminals for the bat- tery holder and the corresponding slot in the camera.

Cat. No. 711.34.011

10V Nicad battery

Dedicated rapid-changing battery with overload protec- tion and spare-fuse compartment; e.g. for extended shoots.

Cat. No. 711.34.010

PowerInterface

Same size as the Nicad battery. Permits connection of different power sources, thus facilitating the stationary and mobile use of the camera. Requires 12 V Power- supply adapter 711.34.013.

Cat. No. 711.34.012

12V Power-supply adapter

Power-supply unit for System 6000 cameras in conjunc- tion with Rollei PowerInterface. Ideal for stationary use of dedicated cameras.

Cat. No. 711.34.013

Rapid charger

100 – 240 V, 50/60 Hz, with automatic rapid-charging stop. Indicators for rapid and normal charging. Rapid charging up to about one hour. 12V terminal for car battery and 3.5mm jack 12V/500 mA. Power-supply cable.

Cat. No. 711.34.022

14