TROUBLESHOOTING |
|
|
PROBLEM | CAUSE | SOLUTION |
THE MACHINE DOES | Make sure the air inlet is connected | Connect It |
NOT OPERATE WHEN | to the compressor. |
|
PRESSING THE FOOT | Make sure the air inlet is in the | Open The Handle |
PEDAL. | open position. |
|
| Make sure the correct air pressure | Make sure the compressor is |
| is supplied | supplying the correct air pressure. |
DEFECTIVE GROMMETING. | The bottom die is worn out or | Replace. |
| broken. |
|
| Incorrect tightness of setting. | See adjustments section of manual. |
| Incorrect adjustment of pneumatic | The manometer must indicate a |
| pressure. | minimum pressure of 6 kg. |
|
|
|
IT WILL NOT CUT OR LEAVE | The bottom die or the top set | Replace it with a new one. |
MATERIAL RESIDUALS. | spindle are worn or broken. |
|
| Incorrect tightness of setting. | See adjustments section of manual. |
|
|
|
THE RING GUARD COMES | The height of the ring guard is not | See the ring guard adjustment |
DOWN, BUT THE DIE DOES | adjusted properly. | section of manual. |
NOT. |
|
|
|
|
|
13
