Singer 321D, 321K instruction manual 2cm

3.2

Machine Installation

Mount the machine head over the machine support plate.

Connect the machine handwheel to the clutch motor with the v-belt (for 321D only)

Adjust the tension of the v-belt so that it can be about 20 mm bent inward when you press the middle of it and make sure the motor turn- ing direction is clockwise, referred to the Figure 3.(for 321D only)

2cm

Figure 3

Set the pedal of the clutch motor to	Install the thread stand referred to
the left side and the pedal of the	the parts list.
presser foot lift at right side.

Install the belt cover according to Figure 4.(for 321D only)

Figure 4

Ultra High Speed Overedge and Safety Stitch Machine Instruction Manual and Parts List 8