Accessories
1.Screwdriver
2.1,5 mm Allen wrench
3.Needles
4.Cleaning brush
5.Machine cover
6.Instruction book
Setting Up
Attaching the power cord and foot control
Plug the power cord into machine socket, then into a wall outlet. Always make sure the power is OFF and remove the plug from the wall outlet when the machine is not in use, or when making any adjustments such as changing needles or light bulb.
Note: Before plugging in, check to ensure that the foot control is of type
Machine speed
The machine speed is adjusted by increasing or decreasing the pressure on the foot control.
When not in use, do not place anything on the foot control to prevent damage to the foot control or motor.
4
For the USA and Canada
This sewing machine has a polarized plug (one blade wider than the other).
To reduce the risk of electric shock, this plug is intended to t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug.
If it still does not t, contact a qualied electrician to install the proper outlet. Do not modify the plug in any way.
34074 Singer ER10 Manual.indd 4 | 6/30/08 10:00:32 AM |
