
TROUBLE SHOOTING
Before taking the unit to a service center, please check the following list of common problems for your issue.
PROBLEM | POSSIBLE CAUSE | SOLUTION | ||
Unit fails to steam. | Unit is not plugged in. | Plug into electrical outlet. | ||
|
| |||
Power Indicator Light | Household Circuit Breaker/ | Reset Circuit Breaker/Ground Fault | ||
does not illuminate. | Ground Fault Interrupter has | Interrupter, or replace fuse. If you need | ||
|
| tripped or blown a fuse. | assistance, Contact a licensed electrician. | |
Unit fails to steam. | Auto | Refer to Auto | ||
| of this manual for proper procedure. | |||
Power Indicator |
|
| ||
Water Reservoir is empty. | Refill Water Reservoir using procedures | |||
Light does illuminate. | ||||
| on page | |||
|
|
| ||
|
|
|
| |
|
| Unit is damaged or malfunctioning. | Please contact our customer support | |
|
|
| department. | |
|
|
|
| |
Steam Burst output is | Pressing Plate needs to be | Refer to Cleaning the Digital Fabric | ||
cleaned. | Steam Press section on page 11 of this | |||
weak or intermittent. | ||||
| manual for proper procedure. | |||
|
|
| ||
|
|
|
|
WARNING :If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
13