or if it is used incorrectly. To reduce the risk of contact with hot water as it escapes through steam
vents, test appliance before each use by holding and testing it away from body.
or if it is used incorrectly. To reduce the risk of contact with hot water as it escapes through steam
vents, test appliance before each use by holding and testing it away from body.
18.Do not operate steamer without properly filling the water container.18.Do not operate steamer without properly filling the water container.
19. Never yank cord to disconnect from outlet. Instead, grasp plug and pull to disconnect.19. Never yank cord to disconnect from outlet. Instead, grasp plug and pull to disconnect.
20.Burns could occur from touching hot metal parts, or proximity to hot water or steam. Do not turn
unit upside down- there may be hot water in reservoir.
20.Burns could occur from touching hot metal parts, or proximity to hot water or steam. Do not turn
unit upside down- there may be hot water in reservoir.
21.To reduce likelihood of circuit overload, do not operate another high wattage appliance on the same
circuit.
21.To reduce likelihood of circuit overload, do not operate another high wattage appliance on the same
circuit.
22.Use distilled water in the appliance.22.Use distilled water in the appliance.
23.Be careful. Burns can occur from touching HOT METAL PARTS, OR PROXIMITY TO HOT WATER
OR STEAM.
23.Be careful. Burns can occur from touching HOT METAL PARTS, OR PROXIMITY TO HOT WATER
OR STEAM.
24.Do not let the cord hang over the edge of counter.24.Do not let the cord hang over the edge of counter.
25.Always put the appliance in a secure and level place on a table or counter when using.25.Always put the appliance in a secure and level place on a table or counter when using.
26.This unit is for household use only.26.This unit is for household use only.
27. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop
cord loosely around appliances when storing.
27. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop
cord loosely around appliances when storing.
28.This appliance must be grounded. Do not alter the plug or attempt to defeat this feature.28.This appliance must be grounded. Do not alter the plug or attempt to defeat this feature.
29.Before plugging in the steam press, be sure the electrical information on the label agrees with your
power supply.
29.Before plugging in the steam press, be sure the electrical information on the label agrees with your
power supply.
SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
33