Sirius Satellite Radio 3 manual Direct Tuning, Channel Presets

Direct Tuning

Channels can be directly accessed by pressing and releasing the Rotary Knob and then using the 0–9 keys to enter the desired channel number. (Figure 5) Once the desired number has been entered, the channel will change and the display will revert to the default screen for the selected channel. The receiver will tune the channel immediately if three numbers are entered (for example, “0”, ”0”, “7”), but if just one or two digits are entered, the receiver will tune to the new channel after three seconds.

Figure 5

Channel Presets

Channel presets allow you to store up to 30 of your favorite channels as presets for quick access with the press of a button.

Setting Channel Presets

Presets are stored in three banks, A, B, and C, each containing 10 channel presets.

1.Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Default display screen.

2.Select the channel you want to preset.

3.Press and hold for two seconds the numbered preset button (0–9) in which you want to store the channel.

4.The selected preset number will flash and then remain lit on the display to show that it has been memorized.

If the preset button you selected already has a channel stored in it, the preset will be replaced

[ Operation ] 23