Pressing the Jump button while the receiver is searching will cancel the search. Pressing the Jump button after the receiver has tuned to your traffic report will return to the channel to which you had been listening immediately prior to pressing the Jump button.
If the jump button is set to JumpSet, pressing the Jump button will immediately tune to the programmed channel. Pressing the Jump button again will return to the channel to which you had been listening immediately prior to pressing the Jump button.
Note: The jump button setting remains the same regardless of which preset bank is currently selected.
Channel Presets (P.TUNE Mode)
Searching for a Channel Preset
It is possible to quickly search through all of your presets using the Rotary Knob:
1.Press and hold the BAND button to enter the preset tune mode (P.TUNE).
2.The bottom right portion of the display will change to highlight the current preset num- ber. (Figure 7)
3.Turn the Rotary Knob in either direction to move through the presets. The selected preset channel will begin to play as soon as you stop turning the Rotary Knob.
Only stored presets will be displayed, regardless of what bank they are stored in. Presets will be grouped and displayed by preset bank and number (for example,
To exit the preset tune mode and return to Default display screen, press and hold the BAND button.
Figure 7
[ Operation ] 25