Operations Common to Each Mode
Dimmer level | Setting the Subwoofer |
You can adjust the reduced illumination level of the dimmer.
∗The factory default setting is “LV3”. (Adjustment range is LV1 to LV5)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select the “ÅDIMMER LVΔ.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the reduced illumina- tion level of the dimmer.
You can set the subwoofer on or off.
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “Å
3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.
4.Press the [T] button to return to the previous mode.
English
● LV1 to LV5:
The dimmer operation is performed depend- | Setting LOW PASS FILTER | |
∗ The factory default setting is “THRGH” (Through). | ||
ing on the set level LV1 to LV5. | ||
∗ If subwoofer function is set “ON”, “LOW PASS FIL- | ||
● OFF: | ||
TER” can be selected. | ||
|
No dimmer operation is performed.
4.Press the [T] button to return to the previous mode.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “8”. (Adjustment level: 1 to 18)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “ÅCONTRAST Δ.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the contrast.
4.Press the [T] button to return to the previous mode.
Anti-theft indicator
The red
∗The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “ÅBLINK LEDΔ.
3.Turn the [ROTARY] knob clockwise to set this function “ON” or turn it counterclockwise to switch this function “OFF”.
4.Press the [T] button to return to the previous mode.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
THRGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4.Press the [T] button to return to the previous mode.
Setting the external amplifier
∗The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select
3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.
● ON:
Use with connected AMP.
●OFF:
Use with inside AMP.
4.Press the [T] button to return to the previous mode.
DXZ745MP 23
