11
Channel selection
Channels are selected with the following buttons.
• The or button (Seek Tuning)
• A [LOC] button
For details, see the following operation descriptions.
Notes:
•The audio output is muted and other button operations are not accepted during
the channel selection process (tuning).
Seek Tuning
1. Press the or button. The receiver seeks the next available channel
below or above the current channel.
The receiver moves to seek channels below or above the current channel. If the
channel found when either button is released is available, that channel is received.
Otherwise, seeking continues until an available channel is found.
Recalling a preset station
A total of 18 SIRIUS stations can be stored (6-SR1, 6-SR2 and 6-SR3). This allows
you to select your favorite SIRIUS stations and store them in memory for later
recall.
1. Press the [BND] button and select the desired SIRIUS band (SR1, SR2 or SR3)
to store the channel in.
2. To recall a stored SIRIUS station, press [BND] button to select the group (S1, S2
or S3) and then choose the station (from 1~6) that you prefer.
Storing a preset station
1. Press the [BND] button and select the desired SIRIUS band (S1, S2 or S3) to
store the channel in.
2. Select the desired station with seek tuning, manual tuning or preset tuning.
3. Press and hold one of [DIRECT] buttons for 2 seconds or longer to store the
current station into preset memory.
Notes:
• When the name of a channel stored in memory is changed by SIRIUS, the display
will show the new channel name immediately. It will not be removed from the
preset channel location.
• A channel stored in memory may be discontinued at the option of SIRIUS. If you
attempt to access this channel from the preset location, the receiver will give you
the “INVALID” or “CHANNEL” response. At that time, you may select another
station to store in memory.