Installation
The FM Extender Antenna should be placed inside the vehicle, as close as possible to the vehicle’s FM antenna. A test mounting should be done first using the included suction cup mounts to test the installation. Once an acceptable location has been found, you will remove the suction cups and permanently adhere the FM Extender Antenna using the adhesive mounts.
To install the FM Extender Antenna in your vehicle, follow these instructions:
1 Attach the suction cups to the FM Extender Antenna in the positions shown in Figure 1.
Suction Cups
Figure 1
2In this step, follow the specific instructions in
a.Installation Instructions for Vehicles with Aerial Type Fender Mounted FM Antenna. For vehicles where the FM radio antenna is located on the front fender, the FM Extender Antenna should be mounted vertically on the front windshield at the edge of the glass nearest to the antenna. (Figure 2)
For vehicles where the FM radio antenna is located on the rear fender, the FM Extender Antenna should be mounted vertically on the rear window at the edge of the glass nearest to the antenna. (Figure 3)
Clean the area where the suction cups will be mounted with the supplied alcohol swab and attach the FM Extender Antenna to the section of glass closest to the FM antenna in a vertical orientation. (Figure 2 or Figure 3) The wire between the two suction cups should be pulled taut and as straight as possible, and should not obstruct the driver’s view.
10 [ Installation ]