g.If the antenna is mounted outside, route the cable from the antenna position to the interior of the home, working the cable through the basement,under a window sill, etc.; make adjustments and take up slack whenever necessary.
h.Plug the antenna cable into the ANT connector on the back of the Shuttle.
i.Plug the DC Adapter cable jack into the DC12V receptacle on the back of the Shuttle.
j.Plug the adapter into a
k.You are now ready to enjoy Sirius programming within your home.
4. Testing Antenna Signal Strength
When signal strength is weak, the possibility of sound interruption is greater than degredation of sound quality. To minimize signal interruptions, it is wise to test antenna signal strength.
Most Plug & Play systems and home units, such as the Shuttle, have special antenna aiming screens within their menu options. Refer to page 18 of the Plug and Play Shuttle Owner’s Manual for Antenna Aiming instructions using the two,
7.Mounting the Antenna
The antenna should be placed on a relatively flat surface whenever possible. To mount the antenna:
a.Plug the antenna into the ANT connector on the back of the cradle.
b.Place the antenna at the preferred location inside or outside the home.
128-7129
8 of 10
