Sirius Satellite Radio SIR-CL1 user manual Connection Example and Identification of Parts

Installation Example (Installing the unit under the driver’s seat)

1. Attach the mounting brackets	to the sides
of the SIR-CL1 using the screws	provided.

2.Select the location on the floor mat. Drill holes in the floor mat to match the positions

of the holes in the mounting brackets .

3. Insert the canoe clips from the rear of the floor mat and install the SIR-CL1.

There are three mounting holes on each side of the SIR-CL1. Select the appropriate holes to match to the installation location.

Connection Example and Identification of Parts

CeNET input/output terminal

Connect to the main unit or CD/MD changer using the CeNET cable as specified .

RCA pin terminals

These are used to output audio when the DSC920S (sold separately) is used to operate the receiver.

ANTENNA terminal

Connect to the SIRIUS antenna (sold separately)

COMMANDER Controller terminal

Connection for DSC920S (sold separately)

COMMANDER Power Supply terminal

Used only when operating the SIR-CL1 with the

DSC920S (sold separately)

CeNET/STANDALONE switch

This switch is used to select the operating type: CeNET (headunit) or STAND ALONE (DSC920S)

5