Sirius Satellite Radio SP-B1 manual Battery Installation

Battery Installation

Your Boombox can operate independently of AC power by installing 8 “D” batteries. The batteries are bypassed automatically whenever the supplied AC Adapter is plugged into the DC 12V jack on the rear panel.

1.Turn the Boombox upside down to access the battery compartment.

2.Push the battery cover latches forward and flip up the battery compartment cover to the open position

3.Insert eight 8 “D” batteries observing battery polarity as shown, then close the cover.

Installing the SP-R1 Receiver in the SP-B1 Boombox

Place the SP-R1 Receiver in the SP-B1 Boombox so that the guides are lined up with the ribs in the Boombox cradle. Push the Receiver down to engage the connectors. Push the top of the Receiver back until it is flush with the front of the Boombox. It will lock into place. Apply power to the Boombox by pressing the Power button; the LED indicator lights green. If the Receiver does not turn on at the same time, press the RED Power ON/OFF button in the upper left corner of the it’s front panel.

Removing the SP-R1 Receiver From the SP-B1 Boombox

Press the EJECT button on top of the Boombox; the Receiver will partially eject forward. Using your thumb and forefinger, grasp the Receiver on the sides and pull up to disengage.

	5
Sportster SP-B1 User Guide