5.Bring the end of the cable out at the SIRIUS radio location. Leave yourself enough cable so you can easily connect it to the antenna connector of the SIRIUS radio or vehicle dock.
SUV/Mini-Van Antenna Cable Routing Procedure
Figure 6 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in an SUV or a Mini-Van.
1. Feed Cable Under |
|
Rubber Seal Around | 4. Bring Cable Out To |
Hatch Opening | SIRIUS Radio |
| Location |
3. Route Cable
Under Carpet
to Dashboard
2. Route Cable Under
Interior Trim, into
Cabin and Towards
Front of Vehicle
Figure 6
Follow these detailed cable installation instructions:
1.Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/door and route the cable along the rear hatch. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Pull the cable out from weather stripping and route it into the cabin under the interior trim. Avoid hinges or gears that could crimp or cut the cable.
2.Route the cable through the SUV’s main cabin area under the interior trim, towards the front of the vehicle. Use a plastic putty knife to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the
