AM/FM RADIO OPERATION
To Listen To The Radio
1. Press the FUNCTION button to enter the RADIO Mode. Press the ALBUM / BAND button to Select a band (AM or FM). If listening to FM, Press the MODE button to select Stereo or Mono.
2. Press and release the Skip/TUNING DN (12) or UP (13) button to tune a station. Press and hold the Skip/TUNING DN (12) or UP (13) button for rapid search tuning.
3. Adjust the VOLUME control. If FM STEREO reception is weak/noisy, press the MODE/ button (10) to Mono, in this case the reception will be monaural.
4. To turn the radio off, rotate POWER ON/OFF volume control counter clockwise.
Antennas
AM - This unit has a
FM - This unit has a
Auto Scan
Press and hold the Skip/TUNING or UP button for approximately 1 second and the unit will automatically search for the next available station.
To Store a Radio Station into Memory
1. Tune a desired station as described in the previous section. Press the PROG. button; the preset numbers
will blink.
2. Within ten seconds, select the desired preset using the PRESET UP (14) or DOWN (15) button to set the desired channel. Press the PROG (11) button
to confirm.
3. To tune to a preset station, simply press the PRESET UP (14) or DOWN (15) button to select the desired preset.
10 12 13 |
11 | 15 14 |
131