![](/images/new-backgrounds/1034905/3490525x1.webp)
USING THE VEHICLE KIT
INSTALLATION
Mounting to the Dashboard or Console
Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty.
If using the AAMPs mounting holes to fasten the Vehicle Mount to your vehicle, Bolt or screw the Vehicle
Mount in place and proceed to step | 1. | 2. | |
2. | |||
|
|
1. Remove the protective film from one side of the supplied double sided 3M tape. Press firmly to secure the tape to the bottom of the Vehicle Mount. (figure 1).
2. | Slide the XACT Sirius Satellite |
|
| Radio Receiver (figure 2) onto |
|
| the mounting tab of the Vehicle |
|
| Mount until it engages. |
|
| (figure 3). | 3. |
3. | Connect the DC Power,antenna |
|
| and audio (if required) to the |
|
| appropriate jacks. (figure 4). |
|
4.
9