SM 1619X00347
Operating Instructions
* NOT AVAILABLE ON ALL MODELS
VARIABLE SPEED CONTROLLED
TRIGGER SWITCH
Your tool is equipped with a variable speed trigger switch. The tool speed can be controlled from the minimum to the maximum nameplate RPM by the pressure you apply to the trigger. Apply more pressure to increase the speed and release pressure to decrease speed. This accurate speed control enables you to drill without center punching. It also permits you to use as a power screwdriver. Bits are available for driving screws as well as running bolts and nuts.
FORWARD/REVERSING LEVER &
TRIGGER LOCK
Your tool is equipped with a forward/ reversing lever and trigger lock located above the trigger (Fig. 1). This lever was designed for changing rotation of the chuck, and for locking the trigger in an “OFF” position to help prevent accidental starts and accidental battery discharge.
*FORWARD/REVERSE INDICATOR LIGHTS Your tool is equipped with lights which indicates the rotation of the chuck.
For forward rotation, (with chuck pointed away from you) move the lever to the far left and the green indicator will light up.
For reverse rotation move the lever to the far right and the red indicator light will light up .
To activate trigger lock move lever to the center off position.
! CAUTION | Do not change direction of |
| rotation until the tool |
|
comes to a complete stop. Shifting during rotation of the chuck can cause damage to the tool.
ADJUSTABLE CLUTCH
Your tool features 26 clutch settings. Output torque will increase as the clutch ring, is
rotated from 1 to 25. The drill “ 
” position will lock up the clutch to permit drilling and driving heavyduty work, and also enables bits to be changed quickly and easily in the keyless chuck.
BRAKE
When the trigger switch is released it activates the brake to stop the chuck quickly.
This is especially useful in the repetitive driving and removal of screws.
GEAR SHIFTING
Your tool is equipped with two separate gear ranges, low gear and high gear. Low gear provides
* AUXILIARY HANDLE
The auxiliary handle will provide additional control, support and guidance for the tool. The handle can be positioned on either side of the tool. To mount, insert mounting bolt into mounting hole, and simply thread handle onto bolt until tight.
* SITE-LIGHT™
Your tool is also equipped with a light that turns on automatically when the switch is activated for better visibility during operation.
The
*BATTERY CHARGED CONDITION INDICATOR
The battery is equipped with a charged condition indicator (Fig.1). The indicator lights shows the charged condition of the battery during the working process.
By pressing the button ON, the charged condition can also be checked when the battery is removed or when the machine is not in use.
•• • When all three lights are illuminated, this indicates the batter pack is fully Charged.
•• When only two lights illuminate, this indicates the batter pack is partially charged.
•When only one light illuminates, this indicates the battery pack is slightly charged.
When no lights illuminate, this indicates the battery pack is completely discharged.
