SM 2610957110 05-08 6/5/08 7:36 AM Page 5

Motor Specifications and Electrical Requirements

General Specifications

Voltage Rating . . . . . . . . . . . . . . . . . . .120 V, 60 Hz

Amperage Rating . . . . . . . . . . . . . . . . . . . . . . . .4 A

No Load Speed . . . . . . . . . . . . . . . . . .No 3,450/min

Table size . . . . . . . . . . . . . . . . . . . . . . . . . . . .9" x 6"

Motor Specifications

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This sander is designed to use a 1700 RPM motor. It is wired for operation on 110-120 volts, 60 Hz. alternating current. Before connecting the motor cord to power source, make certain the switch is in the “OFF” position and be sure the electric current is of the same characteristics as stamped on the sander nameplate.

Connection To A Power Source

This machine must be grounded while in use to protect the operator from electric shock.

Plug power cord into a 110-120V properly grounded type outlet protected by a 15-amp dual element time delay fuse or circuit breaker.

Not all outlets are properly grounded. If you are not sure that your outlet, as pictured in Figure 1, is properly grounded; have it checked by a qualified electrician.

To avoid electric shock, do not touch the ! DANGER metal prongs on the plug when installing

or removing the plug to or from the outlet.

! DANGER

Failure to properly ground this power tool

 

can cause electrocution or serious

 

shock, particularly when used near metal plumbing or other metal objects. If shocked, your reaction could cause your hands to hit the tool.,

!If power cord is worn, cut or damaged in WARNING any way, have it replaced immediately to

avoid shock or fire hazard.

Your unit is for use on 120 volts; it has a plug that looks like the one in Figure 1.

FIG. 1

This power tool is equipped with a 3-conductor cord and grounding type plug, approved by Underwriters Laboratories and the Canadian Standards Association. The ground conductor has a green jacket and is attached to the tool housing at one end and to the ground prong in the attachment plug at the other end.

If the outlet you are planning to use for this power tool is of the two-prong type, DO NOT REMOVE OR ALTER THE GROUNDING PRONG IN ANY MANNER. Have a qualified electrician replace the TWO-prong outlet with a properly grounded THREE-prong outlet.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment- conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment- grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.

Always use proper extension cord. The use of any extension cord will cause some loss of power. To keep this to a minimum and to prevent overheating and motor burn-out, use the table below to determine the minimum wire size (A.W.G.) extension cord. Use only 3-wire extension cords which have 3-prong grounding type plugs and 3-pole receptacles which accept the tool’s plug. Make sure your extension cord is in good condition.

Extension Cord Length

Wire Size A.W.G.

0-25 feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

26-50 feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

51-100 feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

“SAVE THESE INSTRUCTIONS”

5.

Page 4 Page 6
Page 5
Image 5
Skil 3375-01 Motor Specifications and Electrical Requirements, General Specifications, Connection To a Power Source, Feet
Page 4 Page 6

3375-01 specifications

The Skil 3375-01 is a versatile and powerful tool designed to meet the needs of both professionals and DIY enthusiasts. It is a laser guide saw that stands out in the market due to its impressive features and advanced technologies. This tool is particularly celebrated for its precision and ease of use, making it an invaluable addition to any workshop.

One of the key features of the Skil 3375-01 is its Laser Guide System, which provides an accurate line of sight, allowing users to make precise cuts with confidence. This innovative feature significantly enhances cutting accuracy, ensuring that projects are executed flawlessly. The laser is easy to activate and adjust, giving users optimal visibility when working on various materials.

The saw is equipped with a robust 6.5-amp motor, which delivers ample power for a range of cutting applications. It can easily slice through hardwood, softwood, and laminate, making it suitable for tasks ranging from home improvement projects to professional woodworking. The motor's efficiency ensures that it operates smoothly, even under heavy loads.

Another notable characteristic of the Skil 3375-01 is its ease of use. The saw features a lightweight and compact design, allowing for comfortable handling and maneuverability. It also comes with a spindle lock, which facilitates quick and easy blade changes, minimizing downtime during projects. The ergonomically designed handle provides a secure grip, contributing to user comfort during extended use.

Safety is prioritized with the Skil 3375-01, which includes a blade guard that shields users from accidental contact with the blade. The saw's stable base ensures steadiness during operation, further enhancing safety.

The built-in dust port is an additional feature that keeps the workspace clean, effectively directing sawdust away from the cutting area. This not only promotes a clearer line of sight but also contributes to a safer working environment.

In summary, the Skil 3375-01 is a well-rounded tool that combines powerful performance with user-friendly features. Its laser guide, efficient motor, lightweight design, and safety mechanisms make it a top choice for anyone looking to achieve precise cuts with ease. Whether for professional use or home projects, the Skil 3375-01 meets a variety of cutting needs while ensuring user satisfaction.
Top Page Image Contents