Skil 7300 manual Extension Plate, Attaching the 3-POSITION Attachment Support Plate

SM 2610938371 01-06 1/12/06 8:10 AM Page 8

EXTENSION PLATE

When sanding in extremely tight areas, such as louvered panels, remove the hook-and-loop

backing pad and attach the extension plate provided (Fig. 5).

PAD/PLATE

UNLOCK

BUTTON

BACKING

PAD

EXTENSION	FIG. 5
PLATE

ATTACHING THE 3-POSITION ATTACHMENT SUPPORT PLATE

Your sander also features a 3-position attachment support plate. The attachment support plate allows you to easily attach and change the position of accessories provided.

Press the pad/plate unlock button and pull the backing pad free of the sander. Engage rear of 3-position attachment support plate in its recess and press front of pad in place until it engages with a "Click" sound. (Fig. 2).

ATTACHING ACCESSORIES

1.Insert round portion of the attachment into the mounting boss from the side of pad (Fig. 6).

FIG. 6

MOUNTING

BOSS

ATTACHMENT

ATTACHMENT

SUPPORT

PLATE

2.Swing attachment in direction of arrow C flat against pad until rear portion of attachment slides underneath the the adjustment rail (Fig. 7).

3. Lift up on release tab, swing attachment to notch and release tab.

To change position of attachment, simply lift release tab, swing attachment to desired notch and release tab to secure attachment (Fig. 8).

FIG. 7

ADJUSTMENT

RAIL

FIG. 8

REAR END OF

ATTACHMENT

PLATE

ADJUSTMENT

RAIL

RELEASE

TAB

-8-