Skil 7305 PAD/PLATE Unlock Button Backing, Attaching the 3-POSITION Attachment Support Plate

SM 1619X04464 05-09:SM 1619X04464 05-09 5/20/09 1:54 PM Page 10

* ExTENSION PLATE

When sanding in extremely tight areas, such as louvered panels, remove the hook-and-loop

backing pad and attach the extension plate provided (Fig. 5).

PAD/PLATE

UNLOCK

BUTTON

BACKING

PAD

* EXTENSION PLATE FIG. 5

ATTACHING THE 3-POSITION ATTACHMENT SUPPORT PLATE

Your sander also features a 3-position attachment support plate. The attachment support plate allows you to easily attach and change the position of accessories provided.

Press the pad/plate unlock button and pull the backing pad free of the sander. Engage rear of 3-position attachment support plate in its recess and press front of pad in place until it engages with a "Click" sound. (Fig. 2).

ATTACHING ACCESSORIES

1.Insert round portion of the attachment into the mounting boss from the side of pad (Fig. 6).

NOTE: Round portion of the attachment must be fully inserted into the mounting boss in order for the rear end of attachment plate to clear adjustment rail (Fig. 6).

FIG. 6

ROUND PORTION

OF THE

ATTACHMENT

* ATTACHMENT

ATTACHMENT SUPPORT

PLATE

MOUNTING

BOSS

2.Swing attachment in direction of arrow C flat against pad until rear portion of attachment slides underneath the the adjustment rail (Fig. 7). If the attachment will not swing in

direction of arrow. Push attachment further under the mounting boss.

3. Lift up on release tab, swing attachment to notch and release tab.

To change position of attachment, simply lift release tab, swing attachment to desired notch and release tab to secure attachment (Fig. 8).

FIG. 7	REAR END OF
	ATTACHMENT
	PLATE
ADJUSTMENT
RAIL

ADJUSTMENT

RAIL

FIG. 8

RELEASE

TAB

-10-