SM 2610938738
Keep handles dry, clean and free from oil | Keep cutting tools sharp and clean. |
and grease. Slippery hands cannot safely | Properly maintained cutting tools with sharp |
control the power tool. | cutting edges are less likely to bind and are |
Power tool use and care | easier to control. |
Use the power tool, accessories and tool | |
Do not force the power tool. Use the | bits etc., in accordance with these |
correct power tool for your application. | instructions and in the manner intended |
The correct power tool will do the job better | for the particular type of power tool, |
and safer at the rate for which it was | taking into account the working |
designed. | conditions and the work to be performed. |
Do not use the power tool if the switch | Use of the power tool for operations different |
does not turn it on and off. Any power tool | from those intended could result in a |
that cannot be controlled with the switch is | hazardous situation. |
dangerous and must be repaired. | Use clamps or other practical way to |
Disconnect the plug from the power | secure and support the workpiece to a |
source and/or the battery pack from the | stable platform. Holding the work by hand |
power tool before making any | or against your body is unstable and may |
adjustments, changing accessories, or | lead to loss of control. |
storing power tools. Such preventive safety | Service |
measures reduce the risk of starting the | |
power tool accidentally. | Have your power tool serviced by a |
Store idle power tools out of the reach of | qualified repair person using only identical |
children and do not allow persons | replacement parts. This will ensure that the |
unfamiliar with the power tool or these | safety of the power tool is maintained. |
instructions to operate the power tool. | Develop a periodic maintenance schedule |
Power tools are dangerous in the hands of | for your tool. When cleaning a tool be |
untrained users. | careful not to disassemble any portion of |
Maintain power tools. Check for | the tool since internal wires may be |
misalignment or binding of moving parts, | misplaced or pinched or safety guard |
breakage of parts and any other condition | return springs may be improperly |
that may affect the power tools operation. | mounted. Certain cleaning agents such as |
If damaged, have the power tool repaired | gasoline, carbon tetrachloride, ammonia, etc. |
before use. Many accidents are caused by | may damage plastic parts. |
poorly maintained power tools. |
|
SAVE THESE INSTRUCTIONS
Safety Rules for Reciprocating Saws
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
Do not drill, fasten or break into existing walls or other blind areas where electrical wiring may exist. If this situation is unavoidable, disconnect all fuses or circuit breakers feeding this worksite.
Never leave the trigger locked "ON". Before plugging the tool in, check that the trigger lock is "OFF". Accidental
Keep hands away from cutting area. Do not reach under the material being cut.
