Skil HD77M manual Accessories

SM 1619X01288 01-06 1/23/06 8:50 AM Page 13

TWIST-TO-LOCK CONNECTOR INSTRUCTIONS FOR MODELS HD77 & HD77M CODE 72 ONLY

20 AMP, 125 VOLT “TWIST-TO-LOCK”

The Model HD77 & HD77M code 72 is equipped with a “Twist-To-Lock” male connector as shown. Use only a 3-wire extension cord which has a mating “Twist-To-Lock” female connector on one end and a 3-prong grounding plug on the other end. (See Electrical Safety section on page 2 for grounding information.)

Accessories

!WARNING If an extension cord is necessary, a cord with

adequate size conductors that is capable of carrying the current necessary for your tool must be used. This will prevent excessive voltage drop, loss of power or overheating. Grounded tools must use 3-wire extension cords that have 3-prong plugs and receptacles.

NOTE: The smaller the gauge number, the heavier the cord.

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT ALTERNATING CURRENT TOOLS

Tool’s	Cord Size in A.W.G.				Wire Sizes in mm2
Ampere
	Cord Length in Feet				Cord Length in Meters
Rating
	25	50	100	150	15	30	60	120
3-6
	18	16	16	14	0.75	0.75	1.5	2.5
6-8	18	16	14	12	0.75	1.0	2.5	4.0
8-10	18	16	14	12	0.75	1.0	2.5	4.0
10-12	16	16	14	12	1.0	2.5	4.0	—
12-16	14	12	—	—	—	—	—	—

*	Blade	(*= standard equipment)
*	Wrench	(**= optional accessories)

**Carrying case

**Rip Fence

**Non-marring overshoe

-13-