SkyLink manual Keypad Transmitter, Operation Of The Audio Alarm, Alarm AA-433

KEYPAD TRANSMITTER

When the Keypad Transmitter (KP-434) is used in conjuction with the Audio Alarm, it functions the same as the Keychain Trans- mitter (4B-433A or 4B-434). You are able to arm and disarm the audio alarm, activate the siren using the panic button, and turn on/off the chime mode.

Panic button (the red key on the top right of the keypad) - instantly activates the alarm, whether the audio alarm is in arm mode or not. It will always activates the alarm when the “ON” light is lit on the audio alarm.

To arm the audio alarm using the keypad transmitter:

1.Enter the current MPIN on the keypad transmitter (the MPIN is factory pro- grammed with 0 0 0).

2.Press [B], [C], the “ON” light on the keypad transmitter will flash and emit a long beep. The “ARM” light on the audio alarm will be on.

The audio alarm is now armed.

To disarm the audio alarm or terminate the siren:

1.Enter the current MPIN on the keypad transmitter.

2.Press [#], the “ON” light on the keypad transmitter will flash and emit a long beep. The “ARM” light on the audio alarm will be off.

The audio alarm is now disarmed, or the siren is turned off.

When the audio alarm is on but not armed and a remote sensor is activated, the audio alarm will emit one chime, (beep) and the “ON” light will flash once. You may deactivate the chime by pressing [Current MPIN], [C] on the keypad transmitter. For example , if people are using the front door constantly, you may choose to turn off the chime sound.

–9–

OPERATION OF THE AUDIO ALARM

The Audio Alarm is designed to work with Skylink Security System (SC10, SC-100 series, SC-1000 series) and all the Skylink sensors / transmitters. If you are using the Audio Alarm (AA-433) to communicate with a Skylink sensor (i.e. door/ window sensor) and not a Skylink Security System, you will need a Keychain Transmitter (4B-433A or 4B-434) or a Keypad Transmitter (KP-434) to arm/disarm the Audio Alarm. These keychain transmitters are included in the Security System SC-100 and SC-10, you may also purchase these keychain transmitters and keypad transmitter separately. Before you can activate the audio alarm using the keychain transmitter or keypad transmitter, you must first "learn" the transmitter to the audio alarm so that they can communicate with each other.

Program the keychain transmitter to the audio alarm

You may program as many as 15 Skylink sensors/transmitters to the audio alarm. Once any of these sensors/transmitters are activated, the sensor will send a signal to the audio alarm so that the siren (or chime) will sound.

Program sensors / transmitters to the Audio Alarm

1.Turn on the Audio Alarm, (slide the button on the bottom of the unit to "ON"), allow 30 seconds for the Audio Alarm to warm up. With only the “ON” light lit on the Audio Alarm, press and hold the learn button located on the bottom of the Audio Alarm.

2.While pressing down on the button, activate the sensors or transmitters that you want to program to the audio alarm (i.e. keychain transmitter). If you are programming the keychain transmitter, you can activate the transmitter by pressing any one of the buttons. If you are programming the keypad transmitter, you may activate it by pressing the panic button.

3.If a connection has been made, the Audio Alarm will stop beeping and make a continuous tone until the black button on the Audio Alarm is released.

Program control panel (SC-001) to the Audio

Alarm (AA-433)

1. Turn on the Audio Alarm, (slide the button on the bottom of the unit to "ON"), allow 30 seconds for the Audio Alarm to warm up. With only the 'ON' light lit on the Audio Alarm, press and hold the learn button located on the bottom of the Audio Alarm.

2.While pressing down on the button of the Audio Alarm, enter the current MPIN (Master Personal

Identification Number) on the Security Control

Panel (SC001).

3. Press [B] [B] on the Security Control Panel.

4. If a connection has been made, the Audio Alarm will stop beeping and make a continous tone until the learn button on the Audio Alarm is released.

–6–