SkyLink PT-434 manual Press L, 5 when in clock.mode, the display will show “L5 I d codE”

Press [L], [5] when in clock.mode, the display will_ show “L5 I d codE”.

Activate the panic transmitter within 5 seconds by pressing the button on the transmitter. The red LED light of the transmitter will be on when the button is pressed. The display will return to clock mode once the panic transmitter has been learned.

If the button of the panic transmitter is pressed, it will trigger the Emergency Dialer and start dialing- the preset phone numbers (refer to AD-433, AD-002

User’s Instruction for details). -

In an emergency, you can activate the Skylink re- ceivers using the Panic Transmitter. Move the slid- ing cover and press the panic button for one second. This will activate the “learned”

Skylink receiver(s). -

Note: Make sure you press down on the transmitter for one full second or the sys- tem may not respond.

The Remote Control is	WARNING:
approved by the FCC and	Changes or modification3
it complies with Part 15	to this unit not expressly
of the FCC Rules. Its	approved by the party res
operation is subject to the	ponsible of compliance
following two conditions :	could void the user’s
I. This device may not	authority to operate the
cause harmful inter-	equipment.
ference.
2. This device must accept
any interference that
may cause undesired	Smarthome.com, Inc. (800) SMART-HOME
operation.	(949) 221-9200 http://smarthome.com