4. OPERATION
Door/Window Sensor is used to monitor doors or windows that open and close. When these doors / windows are open or closed, the sensors will transmit a signal to the control panel to notify the user.
Refer to the MA Series User’s Instructions for detail information regarding the operation of this door / window sensor with the control panel.
5. SENSOR FAILURE / LOW BATTERY INDICATION
The control panel constantly monitors its sensors, if the control panel fails to communicate with any sensors, it will begin rapidly flashing the zone LED indicator.
When sensor failure occurs, try the following:
1.Check if the sensor is located at where it should be, and whether there is any physical damage to the sensor.
2.If the failed sensor is not physically damaged, try to activate the sensor and see if the control panel reacts to such activation.
3.If not, try to remove the sensor from its location, and bring it closer to control panel and activate the sensor. It is possible that the sensor is installed too far from the control panel and it cannot establish a steady communication with the control panel. If this is the case, please install the sensor closer to the control panel.
4.Replace the battery of the sensor in that zone if the Control Panel does not respond when the sensor is activated within short range.
If you have multiple sensors in a zone, you may test the function of each sensor to identify which sensor is having problem.
6. OTHER MA SERIES ACCESSORIES
The MA Series control panel can work with different accessories include: Motion Sensor, Keychain Remote, Water Sensor, External Keypad, Audio Alarm, Emergency Dialer, etc. Please visit www.skylinkhome.com or contact us at support@skylinkhome.com for more information of how to fully utilize your Wireless Alarm System - MA Series.
7. CE
Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN
8. WARRANTY
If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.
9. CUSTOMER SERVICE
If you would like to order Skylink’s products or have difficulty getting them to work or download latest information and user manual, please :
1.visit our FAQ section at www.skylinkhome.com, or
2.email us at support@skylinkhome.com
CUSTOMER SERVICE
Rm 1303, Block B, Veristrong Industrial Centre, 36 Aupuiwan Street, Fotan, N.T. Hong Kong. Email:sales@skylinkhome.com http://www.skylinkhome.com
P/N. 101Z683
©2009 SKYLINK GROUP
