EXTERNAL SCHEMATIC AND INSTALLATION
Back Panel
Note: The graphics are for representation only.
HDMI3 |
| HDMI2 | PC IN | PC | ANTENNA | S/PDIF | LEFT | RIGHT | ||||
| HDMI IN | AUDIO IN | IN | AUDIO IN | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
USB1 | |
5V 500mA | |
USB2 | |
5V 500mA | |
HDMI1 | |
| IN |
COMPONENT | Y/VIDEO |
Pb | |
| Pr |
9
9
8
1
7
1.HDMI1\HDMI2\HDMI3: Connect HDMI input signal from signal source such as DVD.
2.PC IN: Connect a PC via a VGA cable.
3. PC AUDIO IN: Audio input for PC and Audio input for HDMI when the signal is DVI timing.
4.ANTENNA IN: Connect a coaxial cable to receive signal from the antenna or cable.
5.S/PDIF: Use a 75 ohm coaxial cable to connect your TV to a compatible audio receiver. You can use the S/PDIF interface as digital audio output,in order to achieve better sound quality.
6.AUDIO IN: Connect AUDIO input signal from signal source such as DVD.
7.COMPONENT(Y/VIDEO Pb Pr IN): Connect COMPONENT signal from signal source
such as DVD. VIDEO share the same port with Y port.
8.EARPHONE: Audio output, speakers will be muted when earphone is plugged in and the headphone is selected; speaker will be not muted when an audio output plug is inserted and line output in the menu is selected. The output audio signal is needed when TV connects to other audio instruments, such as an audio amplifier. You can use the EARPHONE interface as anolog audio output in order to achieve better sound quality.
9.USB1\USB2: USB port.
