| R | PRO 923CF / PRO 924CF |
|
| |
|
| Operating Instructions |
|
| Thank you very much for choosing SLIK Carbon Fiber tripod. |
|
| SLIK Corporation has designed your tripod to be a sturdy, rugged, |
|
| dependable product that will provide you with many years of satisfac- |
|
| tory use. |
|
| Please take a few moments to read this operating instruction careful- |
|
| ly before use so that you can take full advantage of your Tripod's |
|
| many fine features. |
|
| Retain this operating instruction in case you might want to refer back to it. |
|
| Caution |
|
| This caution icon refers to information pertaining to important safety |
|
| procedures in preventing injuries, or damages which may occur as a |
|
| result of mishandling this product. |
|
| Prohibition |
|
| This prohibited icon refers to information pertaining to prohibited con- |
M302 |
| tents. Please refer to instructions closely to avoid accidents. |
|
|
Specification
PRO 923CF |
|
Folded length | 708mm |
| (28") |
Max. operating height | 1,900mm |
| (74 3/4") |
Max. center column ext. 310mm
| (12 1/6") |
Weight | 2.32kg |
| (5lbs 2oz) |
PRO 924CF |
|
Folded length | 554mm |
| (22") |
Max. operating height | 1,790mm |
| (70 1/3") |
Max. center column ext. 310mm
| (12 1/6") |
Weight | 2.31kg |
| (5lbs 2oz) |
Components
Center column plate
Center column
Center column stopper
Center column tension adjustment tube
Leg
Base plate
Pan head attachment screw (1/4")
PRO 923CF
Accessory
Pan head attachment screw (3/8")
Crank handle
Main body
Soft grip
PRO 924CF
Leg lock nut
Equipment that can be loaded on this Tripod
Prohibition
This product has been designed to handle equipment weighing under 10 kgs (22 lbs). Do not overload.
Some equipments weighing under 10 kgs (22 lbs), such as long lenses, may not balance well due to its weight distribution. In such case, please use a larger tripod.
Pan Head Attachment Screw
Prohibition
Allen wrench | (2mm width) |
Caution
Soft Grip is consumption and cannot be used permanently. Please replace it whenever ragged.
Do not attach a camera directly to the Pan head attachment screw of the Center column.
This may damage both your camera and tripod.
Carrying the Tripod | In case of the shock | Clamp Head | Three position adjustable |
Prohibition | given to Tripod by force | Prohibition | legs |
|
| ||
| Caution |
| Caution |
Carrying a tripod with a camera left on can result in unexpected accidents. We therefore, recommend you to remove your camera while carrying the tripod.
When the shock has been given to the tripods &/or legs such as falling down please check well whether there are cracks, flaws, etc. on the pipes, or not. When you find any cracks, flaws, etc. on the pipes, please stop to use it and ask to repair. It may be wounded when some of fibers came out from the pipes. In that case, please do not touch it.
Please do not use an optional Clamp Head for a carbon fiber tripod. The pipe may be damaged.
To change the angle of each leg, close the Leg slightly, and then pull the Leg angle adjustment lock out.
There is a choice of two other angle positions. After choosing the desired leg angle, securely push in the Adjustment lock.
