R
U 8000
Operating Instructions
Congratulations on the purchase of a SLIK U 8000 Tripod.
SLIK Corporation has designed your tripod to be a sturdy, rugged, dependable product that will provide you with many years of satisfac- tory use.
Please take a few moments to read this instruction sheet carefully so you can take full advantage of your Tripod's many fine features. Retain this instruction sheet in case you might want to refer back to it.
Caution
This caution icon refers to information pertaining to important safety procedures in preventing injuries, and damages which may occur as a result of mishandling this product.
Prohibited
This prohibited icon refers to information pertaining to prohibited con- tents. Please refer to instructions closely to avoid accidents.
Specification
Length folded | 590mm | |
| (23 | 1/4") |
Max. operating height | 1,500mm | |
| (59 | 1/12") |
Max. center column ext. | 300mm | |
| (11 | 5/6") |
Weight | 1.5kg | |
| (3 lbs 5 oz) | |
Components
Pan head
Center column
Elevation crank handle
Leg lock
Leg lock lever
Rubber leg tip
| Quick release platform |
|
|
| Quick release |
|
|
|
|
| lock lever |
| Vertical tilt knob |
|
|
| Panning lock knob |
|
|
|
|
| |
Center column | Pan & Tilt handle |
|
|
|
|
locking collar |
|
|
|
|
|
Center column |
|
|
|
|
|
cover | Retractable |
|
|
| Quick release |
|
|
|
| ||
| camera positioning pin | Camera post | platform | ||
Center column |
|
|
|
|
|
ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Equipment that can be | Carrying the tripod | ||
used with this tripod |
| Prohibited | |
| |||
| Caution |
| |
|
| ||
|
|
| |
| Prohibited |
|
|
|
|
| |
Leg brace |
|
|
|
This product has been designed | Carrying a tripod with a camera | ||
| to handle equipment weighing |
| left on can result in unexpected |
| under 2 kgs (4 lbs 6 oz). |
| accidents. |
| Do not overload. |
| We therefore, recommend you to |
| Some equipment weighing under |
| remove your camera while carrying |
| 2 kgs (4 lbs 6 oz), such as long |
| the tripod. |
| lenses, may not balance well due |
|
|
|
|
| |
| to its weight distribution. In such |
|
|
| case, please use a larger tripod. |
|
|
|
|
|
|
Attaching camera to the Quick release platform
To remove the Quick release platform from the Pan head, turn Quick release lock lever counterclockwise, and lift Platform out at an angle from the side closest to the lever.
The retractable Camera position- ing pin enables you to mount either a video, or a still camera on to the Quick release platform.
For still cameras, align the length of the Platform along the baseplate of the camera body, and tighten screw into the tripod socket with a coin.
For video cameras, match the Camera positioning pin of the Platform to the corresponding hole beneath the camera, and then tighten screw into tripod socket with a coin.
Replacement Quick release platform for the U 8000 is available. Cat. No.
Return Quick release platform back onto the Pan head by inserting at an angle from the side closest to the Quick release lock lever.
