Network Wireless Interface, Power Input | Slim Devices SLIM DEVICES

Transporter Owner’s Guide	27

Network : Wireless Interface

•True 802.11g wireless networking (can be disabled)

•Bridging capability allows ethernet devices to connect to the network through the wireless interface

•Throughput up to 54Mbps, high speed PCI interface to radio module

•Dual external antennas for improved range and throughput

•Supports all 802.11b and 802.11g access points

•Automatically detects available wireless networks for quick setup

•Supports both WPA Personal (WPA1+TKIP, WPA2+AES) and 64/128-bit WEP encryption

•Wireless radio disabled when using ethernet connection

•True 100Mbps throughput

•Shielded CAT5 RJ-45 connector

•Connects to any 100Mbps or 10Mbps network

•Auto-detects full duplex and half duplex modes

•Automatic receive polarity correction

•Maximum cable length: 100 meters (328 feet)

•RS-232 connector for serial integration with Crestron and other home automation systems

•3.5mm infrared input connector

•3.5mm infrared emitter connector

•100-240v, 50-60Hz AC

•Internal Fuse: 500mA

•Standard IEC power connector

•Included IEC power cable specific to shipping destination

•Separate linear supplies for Analog, DAC, and clocks

•Auto-ranging, relay-controlled AC input

•Three Super Regulators for analog stages (+15, -15, +5)

•High-efficiency, low noise SMPS for CPU, Display

•Continuous AC voltage monitoring

•Automatic over-voltage protection

•Low-power “deep sleep” mode