HT805 Series Owner’s Manual
Page 8
Connection Diagram using a dedicated subwoofer output
Switch set to FULL RANGE
Adjust level and phase (crossover disabled)
Input signal from dedicated subwoofer output on receiver - processor
Output signal to optional 2nd subwoofer
Connection Diagram using a line level stereo output
Switch set to LOW PASS 
Adjust crossover, level and phase
Output signal to amplifier powering the satellites
Stereo line level signal from preamplifier (preferabley a 2nd independent signal
from preamplifiers that have two outputs, 
the 1st output would go directly to the amplifier powering the satellites. A “Y” cable at the preamplifer for each channel can also be used to accomplish the same purpose)
Output signal to amplifier powering the satellites
Rev: 602 | 1650 W. Jackson Ozark, MO 65721 (417) |
