Smart Inventions 990-2689E manual XLJ models, XLT models, XLTW models, XLI models

NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, NETWORK MANAGEMENT CARD,

OPTIONAL SMART SLOT ACCESSORY CARDS OR TERMINAL MODE.

FUNCTION	FACTORY	USER SELECTABLE	DESCRIPTION
	DEFAULT	CHOICES
High Bypass Point	+10% of	+5%, +10%, +15%,	Maximum voltage that the UPS
	output voltage	+20%	will pass to connected
	setting		equipment during internal
			bypass operation.
Low Bypass Point	-30% of output	-15%, -20%, -25%, -30%	Minimum voltage that the UPS
	voltage setting		will pass to connected
			equipment during internal
			bypass operation.
Output Voltage	XLJ models:	XLJ models:	Allows the user to select the
	200 VAC	200 VAC	UPS output voltage while
	XLT models:	XLT models:	on-line.
	208 VAC	200, 208, 220, 230,
		240 VAC
	XLTW models:	XLTW models:
	220 VAC	200, 208, 230, 240 VAC
	XLI models:	XLI models:
	230 VAC	200, 208, 220, 230,
		240 VAC
		*Use the voltage setting
		applicable to your region.
Output Frequency	Automatic	50 ± 3 Hz	Sets the allowable UPS output
	(50 ± 3 Hz or	50 ± 0.1 Hz	frequency. Whenever possible,
		60 ± 3 Hz	the output frequency tracks the
	60 ± 3 Hz)
		60 ± 0.1 Hz	input frequency.
Number of Battery	1	Number of Connected	Defines the number of
Packs		Batteries (four battery	connected battery packs for
		modules per pack)	proper runtime prediction.

10