9 | CHAPTER 2 – CONFIGURING YOUR HUB
To connect your hub
to a computer
Connect the computer to the SMART Hub SE240 using the appropriate cables
and connectors.
NOTE
The SMART product and audio connections are optional.
To configure your hub
for the computer
1. Select System > Settings.
The Settings dialog box appears.
2. Press Input Configuration.
3. In the Input device name box, type a name for the computer.
4. In the Input Type list, select Analog or Digital.
IMPORTANT
–Select Analog if you are using a VGA/DVI-I cable, or if you are using a
DVI/DVI cable with a VGA/DVI adapter.
–Select Digital if you are using a DVI/DVI cable.
– If the setup is incorrect, your hub will not work with a Mac computer.
5. Press Apply All.
A Picture Settings dialog box appears allowing you to change your hub’s
brightness or contrast. Press Adjust Settings, OK, Cancel or Reset accordingly.
Power
Source Computer 2
Network
USB
Storage
Devices,
Keyboard
and
Mouse
Video
Source
1
Video
Source
2
Display
Computer 1