b. Pull one of the 4 red tabs out and remove the filter bag from the bottom lid. Turn the filter bag inside out. Use a garden hose to wash it thoroughly. The bag should be laundered periodically, using a regular wash cycle.

c. Rinse the bottom lid parts and bottom brushes.

d. Refit the filter bag with the fluffy surface inward. Start from one corner - align one of the red tabs with the corner. Gently insert the stitched edge of the filter bag into the double walls (groove) of the bottom lid, and work your way around.

e. Replace the bottom lid assembly in the body of the unit and lock in place.

3) Impeller

Occasionally hair or linen may get caught in the impeller. If that happens, take the top grill off by removing the 2 screws from the top. MAKE SURE THE TRANSFORMER IS UNPLUGGED. Remove the debris. Replace the top grill and tighten the 2 screws.

4) Front Drive Wheels and Rear Idler Wheels

Remove debris or tree leaves caught in the axle bearing. CAUTION: Do not turn the drive wheels by force. This may cause damage to the drive gear train.

5) Winterization

Always remove cleaner from pool for winterization. Do not store Robo-Kleen where the temperature drops below 40˚ F. Freezing temperatures can affect seals and lubricants used in the mechanism.

7

Page 7
Image 7
SmartPool Inc Robo-Kleen warranty Impeller, Front Drive Wheels and Rear Idler Wheels, Winterization