C

OMPLIANCES

iiiSafety Compliance

Warning: Fiber Optic Port Safety

Avertissment: Ports pour fibres optiques - sécurité sur le

plan optique

Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit

Underwriters Laboratories Compliance Statement

Important!
Before making connections, make sure you have the correct cord set.
Check it (read the label on the cable) against the following:

The unit automatically matches the co nnected input voltage. Therefore, no additi onal
adjustments are necessary when connecting it t o any input voltage within the range
marked on the rear panel.
When using a fiber optic port, never look at the t ransmit laser
while it is powered on. Also, never look directly at the fiber TX
port and fiber cable ends when they are p owered on.
Ne regardez jamais le laser tant qu'il est sous tension. Ne
regardez jamais directement le port TX (Transmission) à fibres
optiques et les embouts de câbles à fibr es optiques tant qu'ils
sont sous tension.
Niemals ein Übertragungslaser betrachten, während dieses
eingeschaltet ist. Niemals direkt auf den Faser-TX -Anschluß und
auf die Faserkabelenden schauen, währe nd diese eingeschaltet
sind.
Operating Voltage Cord Set Specifications
120 Volts UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment plug
rated 15A, 125V
240 Volts (Europe only) Cord Set with H05VV-F cord having three
conductors with minimum diameter of 0.75 mm2
IEC-320 receptacle
Male plug rated 10A, 250V