Manuals / SMC Networks / Computer Equipment / Switch

SMC Networks SMC-EZ1024DT manual Specifications

Models: SMC-EZ1024DT

1 32

Download 32 pages 1015 b

Page 28

SPECIFICATIONS

SPECIFICATIONS

Access Method

CSMA/CD

Ports

810BASE-T/100BASE-TX, with auto-negotiation

1100BASE-TX/1000BASE-T with auto-negotiation

Network Interface

RJ-45: 100 ohm, UTP cable 10BASE-T - Categories 3, 4, or 5 100BASE-TX - Category 5 1000BASE-T - Category 5 or 5e

LEDs

System: Power

Ports 1-8: Link/Act, FDX/COL, 10/100M

Gigabit Port: Link/Act, FDX/COL, 100M, 1000M

Switching Method

Store-and-forward

MAC Address Table

4K total

Memory Buffer

2 MBytes per system

Filtering/Forwarding/Learning Rates

Full line rate

Flow Control

Full Duplex: IEEE 802.3x

Half Duplex: Back pressure

Size

250 x 117 x 37 mm (9.84 x 4.61 x 1.46 in.)

16

Image 28

SMC Networks SMC-EZ1024DT manual Specifications

Contents

8-Port Fast Ethernet Switch EZ Switch 10/1008 auto-MDI/MDI-X ports-connect to PCs or other switches or hubs Plug and play-nothing to configurePage EZ Switch 10/100 User Guide From SMC’s EZ line of low-cost workgroup LAN solutions6 Hughes Irvine, CACopyright TrademarksLimited Warranty LIMITED WARRANTYLIMITED WARRANTY SMC Networks, Inc 6 Hughes Irvine, CAFCC Class A COMPLIANCESEC Conformance Declaration - Class A Industry Canada - Class A Safety ComplianceCOMPLIANCES Wichtige Sicherheitshinweise Germany COMPLIANCESCOMPLIANCES TABLE OF CONTENTS About the EZ Switch 10/100Installing the Switch SpecificationsTABLE OF CONTENTS ABOUT THE EZ SWITCH 10/100Features and Benefits Front Panel LEDs Port and System Status LEDsCondition StatusRear Panel The AC power receptacle is located on the rear panel of the switchPort and System Status LEDs ConditionEquipment Checklist INSTALLING THE SWITCHSelecting a Site Applying Power Positioning the SwitchInstructions Connecting to the Gigabit Uplink Port RJ-45 10/100 Mbps ConnectionsSample Applications Gigabit Uplink Port - You can use the Gigabit port to support applications such as high-speed file servers, or for connecting to a collapsed backbone switch TROUBLESHOOTING CABLES CABLE SPECIFICATIONsConnector Maximum 10BASE-T, 100BASE-TX and 1000BASE-T Cable LengthRJ-45 Connector Pin Assignments 10BASE-T/100BASE-TX Pin Assignments1000BASE-T Pin Assignments Cable Testing for Existing Category 5 Cable 1000BASE-T Cable RequirementsAdjusting Existing Category 5 Cabling to Run 1000BASE-T SPECIFICATIONS Weight SPECIFICATIONS Page INTERNET FOR TECHNICAL SUPPORT, CALLFOR LITERATURE OR ADVERTISING RESPONSE, CALL