Compliances
Safety Compliance
Underwriters Laboratories Compliance Statement
Important! Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following:
Operating Voltage | Cord Set Specifications |
|
|
120 Volts | UL Listed/CSA Certified Cord Set |
|
|
| Minimum 18 AWG |
|
|
| Type SVT or SJT three conductor cord |
|
|
| Maximum length of 15 feet |
|
|
| Parallel blade, grounding type attachment plug |
| rated 15 A, 125 V |
|
|
240 Volts | Cord Set with |
(Europe only) | with minimum diameter of 0.75 mm2 |
| |
|
|
| Male plug rated 10 A, 250 V |
|
|
The unit automatically matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel.
ix
