SMC Networks SMC3056EM manual Modem Commands

Models: SMC3056EM

1 45
Download 45 pages 47.03 Kb
Page 3
Image 3

Notices to Australian users:

The modem card must only be used in a data terminal equipment (DTE) e.g. computer, that has a screw down cover (lid). As unsafe voltages (TNV) exist on the modem card, disconnect the modem card from the telephone line while the cover (lid) of the DTE (computer) is removed.

Installation of the modem card in a DTE (computer) which does not require a tool to open the cover (lid) will render the permit void.

Disconnect the telephone line before opening the cover (lid) of the DTE (computer). Do not connect the customer equipment to the telephone line while the cover (lid) of the DTE (computer) is open.

WARNING

ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS

COMPLIANCE LABEL

WARNING

FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIOS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED.

Modems connected to the Australian telecommunications network must be marked in accordance with the Labeling Notice. This modem has been specifically configured to ensure compliance with the ACA Standards. Do not adjust your modem or software outside the values indicated as below. To do so would result in your modem being operated in a non-compliant manner.

Modem Commands:

 

Command

Default

Permissible Range

ATA

-

Do not use

ATB

B0

Do not set to B1

AT&G

&G0

&G2

AT&P

&P0

&P1

ATSn

see table below

 

S register

Default

Permissible Range

s6

2

2 to 6

Call Attempts/Retries:

Applications software shall be configured so that no more than 3 attempts are made to establish a connection to a given number (Note: if the modem can detect service tones, up to 10 attempts can be made). If the call sequence is unsuccessful, there shall be a delay of at least 30 minutes before attempting to call the number again.

Failure to set the modem and any application software used with the modem, to the values shown as above will result in the modem being operated in a non-compliant manner. Consequently, this would be in violation of the Labeling Notice for this equipment, and the Telecommunications ACT 1997 prescribes penalties for the connection of non-compliant equipment.

3

Page 3
Image 3
SMC Networks SMC3056EM manual Modem Commands

SMC3056EM specifications

SMC Networks has been a prominent player in the networking industry, known for its dedication to delivering reliable products that meet the demands of both consumers and businesses. One of its noteworthy offerings is the SMC3056EM, a high-performance Ethernet switch that boasts a range of features designed to enhance network efficiency and performance.

The SMC3056EM is a managed Ethernet switch that comes with 56 ports, making it an ideal choice for small to medium-sized enterprises looking to expand their network capacity. This switch supports Gigabit Ethernet, which enables faster data transfer rates and supports high-bandwidth applications. With its ability to facilitate 10/100/1000 Mbps speeds, the SMC3056EM ensures seamless connectivity for various devices within a network.

One of the standout features of the SMC3056EM is its Layer 2 switching capabilities. This technology enables efficient data packet switching, reducing overall latency and improving response times in data-heavy environments. Moreover, the switch supports VLAN (Virtual Local Area Network) configurations, allowing administrators to segment network traffic for improved security and performance.

Additionally, the SMC3056EM incorporates Quality of Service (QoS) features, which prioritize critical network traffic, ensuring that essential applications receive the bandwidth they require. This is particularly important for businesses that rely on VOIP, video conferencing, or other real-time applications, as it mitigates issues related to latency and jitter.

The SMC3056EM is also equipped with advanced management capabilities, including SNMP (Simple Network Management Protocol) support. This feature enables network administrators to monitor and manage the switch remotely, facilitating ease of use and quick troubleshooting. The user-friendly interface allows for easy configuration and modification of network settings.

Another notable characteristic of the SMC3056EM is its energy efficiency. The switch is designed with power-saving technologies that reduce energy consumption without sacrificing performance. This is an appealing feature for environmentally conscious businesses looking to minimize their carbon footprint.

In summary, the SMC Networks SMC3056EM stands out as a versatile and robust networking solution. With its extensive port availability, Layer 2 switching capabilities, VLAN support, QoS features, advanced management options, and energy-efficient design, it meets the demands of modern networking environments, making it a solid choice for enterprises looking to enhance their network infrastructure.